Press "Enter" to skip to content

Author: Liz Henry

Prototyping a free wheelchair repair kit and zine

I am working on a zine for GOAT “fix-it-kits”. The zine encourages people to maintain and be prepared for emergency repairs on their mobility devices. It’s a lot of fun, and I can’t wait to show the prototype to people for feedback before I make the first batch for our next workshop!

The zine has space for writing down the specifics of your device; a toolbag checklist; then tips on inspecting, cleaning wheelchairs and other gear, as well as checking all its fasteners and accessories. I wrap it up with some thoughts on Right-to-Repair and a list of local resources and communities.

The “Fix-it-Kit” is a sturdy vinyl zipper pouch with grommets that will be useful to attach the kit to the frame of a chair. It is fairly small and thin but not flat; it has space for mini tools.

small zipper bag with tools and a pocket sized zine visible inside

a couple of pages of a zine with an intro and table of contents

There aren’t really standards for wheelchair bolts, screws, and so on. So we can’t pick one basic set of tools to include in each bag. Instead, the “motherkit” messenger bag has an assortment of tools and parts, like hex keys and bolts in metric and standard sizes. These have to be individually picked out for a person and for their chair.

This motherkit will also have specific tools for manual chairs, like mini tire pumps and patches. The tiny pieces like stickers, rubber bands, washers and bolts will go into (donated) small metal tins (like Altoids tins) inside the pouch.

For the things we’re buying, I’ll be fundraising to support giving these free kits to any wheelchair user who comes to our repair, build, and hacking events!

I’ll have a list of specific tool donations we’re looking for, and will set up an Amazon wish list so people can donate new items to GOAT.

The most expensive part of this kit will likely be a small but decent quality crescent wrench, which I think is critical. Another expensive but great thing for the kit – mini rolls of gaffer or duct tape. And if people have dexterity or hand pain issues and need or want T-handle drivers for sockets, screws, and hex bolts, we want to be able to offer them.

I’ll be posting again soon with a full draft of the zine, and the parts list for the fix-it-kits.

Please donate to support our Fix it Kit and zine project!

What tools do you carry for your wheelchair, powerchair, or scooter maintenance or emergency repair? I would love to hear and to get suggestions for the zine or the fix-it-kits.

Leave a Comment

Free Webinar: Power wheelchairs and Right-to-Repair law in California

MARK YOUR CALENDARS!
December 12
2:00-3:00 PM, Pacific Time

The CIL’s partners at the DONetwork are proud to put on this educational webinar explaining the ins and outs of the new Power Wheelchair Right to Repair law in California.

Please register here: https://tinyurl.com/DOnetworkSB1384

The DOnetwork will be producing a public education webinar for SB 1384, the “powered wheelchair right to repair” bill, sponsored by Sen. Dodd. This legislation becomes law on January 1, and it has impacts that will increase the ability for independent repair shops and individuals to access parts and equipment to make repairs on powered wheelchairs.

Here’s an overview of what will be covered:

  • What SB 1384 means for the community, and how it will be implemented in California?
  • How is right to repair working in other states?
  • What are the next steps for pushing this issue in California?
  • Invited panelists include State Senator Bill Dodd, Capitol Staff Ana Vazquez, a representative from NCART – the association for providers of power chairs and complex rehab technology, and a consumer.

    a whill model ci powerchair up on a jack with the front wheel removed

    Leave a Comment

    Your ideas are intriguing to me, and I wish to subscribe to your newsletter

    We now have a newsletter! It is called GOAT Notes, and has a cute little logo of a cartoon goat holding up a paper scroll, having taken a bite out of the paper.

    You can subscribe to the newsletter for free, but there is also an option to donate to support the newsletter, and our organization, via Stripe, when you sign up.

    I have not decided on newsletter frequency. There may be a cadence of once per month, but with shorter updates for announcements of new events. Or, I could aim for a short update roughly once per week. Either way, a frequency between weekly and monthly seems likely.

    You can also read, share, or link to the back archives of GOAT Notes, someday when we have more than one issue!

    a cute cartoon goat holding a paper scroll that says GOAT Notes. there is a bite out of the top of the scroll for extra cuteness

    Leave a Comment